MACD底部结构预警,组合各种背离和结构形成（通达信公式 副图 源码 测试图）

 

平时比较留意，特别收集了许多各个版本的MACD公式，每个公式都有自己的特点，所以总是想把各种功能组合在一起，这样就直观一些，特别适合一些像我这样的新手一样使用，终于达到了自己想要的效果，向老师学习助人为乐的精神，所以发出来，有未来，但是通过使用不影响正常使用，不喜欢的不要喷，公式就是公式，不是交易依据。

 

{MACD背离}

DIF:EMA(CLOSE,12)-EMA(CLOSE,26);

DEA:EMA(DIF,9);

MACD:2*(DIF-DEA), COLORSTICK,LINETHICK2;

A1:=BARSLAST(REF(CROSS(DIF,DEA),1));

底背离:=REF(CLOSE,A1+1)>CLOSE AND DIF>REF(DIF,A1+1) AND CROSS(DIF,DEA);

STICKLINE(底背离,0,0.03,6,0),COLOR00FF00;

底背:DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORRED,LINETHICK4;

DRAWTEXT(底背离,0.12,' 底背离'),COLORFF00FF;

A2:=BARSLAST(REF(CROSS(DEA,DIF),1));

顶背离:=REF(CLOSE,A2+1)DIF AND CROSS(DEA,DIF);

顶背:DRAWLINE(A2=0,DEA,顶背离,DEA,0),COLORGREEN,LINETHICK4;

DRAWICON(CROSS(DIF,DEA),DEA,1);

DRAWICON(CROSS(DEA,DIF),DEA,2);

STICKLINE(MACD>REF(MACD,1)AND MACD>0,0,MACD,0.2,0),COLORRED;

STICKLINE(MACD0,0,MACD,0.2,0),COLORRED;

STICKLINE(MACD>REF(MACD,1)AND MACD<0,0,MACD,0.2,0),COLORBLUE;

STICKLINE(MACD

{底部结构预警}

死叉:=CROSS(DEA,DIF);

N1:=BARSLAST(死叉),NODRAW;{最近一次死叉的位置}

N2:=REF(BARSLAST(死叉),N1+1),NODRAW;{倒数第二次死叉与倒数第一次死叉的区间}

N3:=REF(BARSLAST(死叉),N2+N1+2),NODRAW;{倒数第三次死叉与倒数第二次死叉的区间}

CL1:=LLV(C,N1+1),NODRAW;{最近一次死叉后，最低收盘价}

DIFL1:=LLV(DIF,N1+1),NODRAW;

CL2:=REF(CL1,N1+1),NODRAW;{倒数第二次死叉与倒数第一次死叉之间的最低收盘价}

DIFL2:=REF(DIFL1,N1+1),NODRAW;

CL3:=REF(CL2,N1+1),NODRAW;{倒数第三次死叉与倒数第二次死叉之间的最低收盘价}

DIFL3:=REF(DIFL2,N1+1),NODRAW;

PDIFL2:=IF(DIFL2>0,INTPART(LOG(DIFL2))-1,INTPART(LOG(-DIFL2))-1);

MDIFL2:=INTPART(DIFL2/POW(10,PDIFL2));

PDIFL3:=IF(DIFL3>0,INTPART(LOG(DIFL3))-1,INTPART(LOG(-DIFL3))-1);

MDIFL3:=INTPART(DIFL3/POW(10,PDIFL3));

MDIFB2:=INTPART(DIF/POW(10,PDIFL2));

MDIFB3:=INTPART(DIF/POW(10,PDIFL3));

直接底背离:=(CL1MDIFL2) AND (MACD<0 AND REF(MACD,1)<0) AND MDIFB2<=REF(MDIFB2,1);

隔峰底背离:=(CL1MDIFL3) AND (MACD<0 AND REF(MACD,1)<0) AND MDIFB3<=REF(MDIFB3,1);

B:直接底背离 OR 隔峰底背离,NODRAW;

BG:((MDIFB2>REF(MDIFB2,1))*REF(直接底背离,1)) OR ((MDIFB3>REF(MDIFB3,1))*REF(隔峰底背离,1)),NODRAW;

底背离消失:=(REF(直接底背离,1) AND DIFL1<=DIFL2 ) OR (REF(隔峰底背离,1) AND DIFL1<=DIFL3);

DRAWTEXT(TFILTER(B,MACD>0,1),(DIF+MACD),'钝化'),COLORRED;

STICKLINE(B OR BG,DIF,DEA,1,0),COLORRED;

DRAWTEXT(TFILTER(底背离消失,B,1),(DIF+MACD),'消失'),COLORYELLOW;

DRAWTEXT(TFILTER(BG,MACD>0,1),DIF*1.1,'结构形成'),COLORGREEN;

{顶部结构预警}

金叉:=CROSS(DIF,DEA);

M1:=BARSLAST(金叉),NODRAW;{最近一次金叉的位置}

M2:=REF(BARSLAST(金叉),M1+1),NODRAW;{倒数第二次金叉与倒数第一次金叉的区间}

M3:=REF(BARSLAST(金叉),M2+M1+2),NODRAW;{倒数第三次金叉与倒数第二次金叉的区间}

CH1:=HHV(C,M1+1),NODRAW;{最近一次金叉后，最高收盘价}

DIFH1:=HHV(DIF,M1+1),NODRAW;

CH2:=REF(CH1,M1+1),NODRAW;{倒数第二次金叉与倒数第一次金叉之间的最高收盘价}

DIFH2:=REF(DIFH1,M1+1),NODRAW;

CH3:=REF(CH2,M1+1),NODRAW;{倒数第三次金叉与倒数第二次金叉之间的最高收盘价}

DIFH3:=REF(DIFH2,M1+1),NODRAW;

PDIFH2:=IF(DIFH2>0,INTPART(LOG(DIFH2))-1,INTPART(LOG(-DIFH2))-1);

MDIFH2:=INTPART(DIFH2/POW(10,PDIFH2));

PDIFH3:=IF(DIFH3>0,INTPART(LOG(DIFH3))-1,INTPART(LOG(-DIFH3))-1);

MDIFH3:=INTPART(DIFH3/POW(10,PDIFH3));

MDIFT2:=INTPART(DIF/POW(10,PDIFH2));

MDIFT3:=INTPART(DIF/POW(10,PDIFH3));

直接顶背离:=(CH1>CH2 ) AND (MDIFT20 AND REF(MACD,1)>0) AND MDIFT2>=REF(MDIFT2,1);

隔峰顶背离:=(CH1>CH3 AND CH3>CH2 ) AND (MDIFT30 AND REF(MACD,1)>0) AND MDIFT3>=REF(MDIFT3,1);

T:直接顶背离 OR 隔峰顶背离,NODRAW;

TG:((MDIFT2

顶背离消失:=(REF(直接顶背离,1) AND DIFH1>=DIFH2 ) OR (REF(隔峰顶背离,1) AND DIFH1>=DIFH3);

DRAWTEXT(TFILTER(T,MACD<0,1),(DIF+MACD),'钝化'),COLORGREEN;

DRAWTEXT(TFILTER(顶背离消失,T,1),(DIF+MACD),'消失'),COLORYELLOW;

STICKLINE(T OR TG,DIF,DEA,1,0),COLORGREEN;

DRAWTEXT(TFILTER(TG,MACD<0,1),DIF*1.02,'结构形成'),COLORMAGENTA;